Add RetroPie configs backup from /opt/retropie/configs

키 설정·패드 매핑·에뮬 설정을 sync-configs.sh로 동기화.

Co-authored-by: Cursor <cursoragent@cursor.com>

configs/pc/dosbox-SVN.conf

@@ -0,0 +1,259 @@
+# This is the configuration file for DOSBox SVN. (Please use the latest version of DOSBox)
+# Lines starting with a # are comment lines and are ignored by DOSBox.
+# They are used to (briefly) document the effect of each option.
+
+[sdl]
+#       fullscreen: Start dosbox directly in fullscreen. (Press ALT-Enter to go back)
+#       fulldouble: Use double buffering in fullscreen. It can reduce screen flickering, but it can also result in a slow DOSBox.
+#   fullresolution: What resolution to use for fullscreen: original, desktop or a fixed size (e.g. 1024x768).
+#                     Using your monitor's native resolution with aspect=true might give the best results.
+#                     If you end up with small window on a large screen, try an output different from surface.On Windows 10 with display scaling (Scale and layout) set to a value above 100%, it is recommended
+#                     to use a lower full/windowresolution, in order to avoid window size problems.
+# windowresolution: Scale the window to this size IF the output device supports hardware scaling.
+#                     (output=surface does not!)
+#           output: What video system to use for output.
+#                     Possible values: surface, overlay.
+#         autolock: Mouse will automatically lock, if you click on the screen. (Press CTRL-F10 to unlock)
+#      sensitivity: Mouse sensitivity. The optional second parameter specifies vertical sensitivity (e.g. 100,-50).
+#      waitonerror: Wait before closing the console if dosbox has an error.
+#         priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized.
+#                     pause is only valid for the second entry.
+#                     Possible values: lowest, lower, normal, higher, highest, pause.
+#       mapperfile: File used to load/save the key/event mappings from. Resetmapper only works with the default value.
+#     usescancodes: Avoid usage of symkeys, might not work on all operating systems.
+
+fullscreen       = false
+fulldouble       = false
+fullresolution   = original
+windowresolution = original
+output           = surface
+autolock         = true
+sensitivity      = 100
+waitonerror      = true
+priority         = higher,normal
+mapperfile       = mapper-SVN.map
+usescancodes = false
+
+[dosbox]
+# language: Select another language file.
+#  machine: The type of machine DOSBox tries to emulate.
+#             Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe.
+# captures: Directory where things like wave, midi, screenshot get captured.
+#  memsize: Amount of memory DOSBox has in megabytes.
+#             This value is best left at its default to avoid problems with some games,
+#             though few games might require a higher value.
+#             There is generally no speed advantage when raising this value.
+
+language = 
+machine  = svga_s3
+captures = capture
+memsize  = 16
+
+[render]
+# frameskip: How many frames DOSBox skips before drawing one.
+#    aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!
+#    scaler: Scaler used to enlarge/enhance low resolution modes. If 'forced' is appended,
+#              then the scaler will be used even if the result might not be desired.
+#              To fit a scaler in the resolution used at full screen may require a border or side bars,
+#              to fill the screen entirely, depending on your hardware, a different scaler/fullresolution might work.
+#              Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x.
+
+frameskip = 0
+aspect    = false
+scaler = none
+
+[cpu]
+#      core: CPU Core used in emulation. auto will switch to dynamic if available and
+#              appropriate.
+#              Possible values: auto, dynamic, normal, simple.
+#   cputype: CPU Type used in emulation. auto is the fastest choice.
+#              Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch.
+#    cycles: Amount of instructions DOSBox tries to emulate each millisecond.
+#              Setting this value too high results in sound dropouts and lags.
+#              Cycles can be set in 3 ways:
+#                'auto'          tries to guess what a game needs.
+#                                It usually works, but can fail for certain games.
+#                'fixed #number' will set a fixed amount of cycles. This is what you usually
+#                                need if 'auto' fails (Example: fixed 4000).
+#                'max'           will allocate as much cycles as your computer is able to
+#                                handle.
+#              Possible values: auto, fixed, max.
+#   cycleup: Amount of cycles to decrease/increase with keycombos.(CTRL-F11/CTRL-F12)
+# cycledown: Setting it lower than 100 will be a percentage.
+
+core = dynamic
+cputype   = auto
+cycles = max
+cycleup   = 10
+cycledown = 20
+
+[mixer]
+#   nosound: Enable silent mode, sound is still emulated though.
+#      rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality.
+#              Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged.
+#              Possible values: 1024, 2048, 4096, 8192, 512, 256.
+# prebuffer: How many milliseconds of data to keep on top of the blocksize.
+
+nosound   = false
+rate      = 44100
+blocksize = 1024
+prebuffer = 25
+
+[midi]
+#     mpu401: Type of MPU-401 to emulate.
+#               Possible values: intelligent, uart, none.
+# mididevice: Device that will receive the MIDI data from MPU-401.
+#               Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
+# midiconfig: Special configuration options for the device driver. This is usually the id or part of the name of the device you want to use (find the id/name with mixer/listmidi).
+#               Or in the case of coreaudio, you can specify a soundfont here.
+#               When using a Roland MT-32 rev. 0 as midi output device, some games may require a delay in order to prevent 'buffer overflow' issues.
+#               In that case, add 'delaysysex', for example: midiconfig=2 delaysysex
+#               See the README/Manual for more details.
+
+mpu401     = intelligent
+mididevice = alsa
+midiconfig = 128:0
+
+[sblaster]
+#  sbtype: Type of Soundblaster to emulate. gb is Gameblaster.
+#            Possible values: sb1, sb2, sbpro1, sbpro2, sb16, gb, none.
+#  sbbase: The IO address of the soundblaster.
+#            Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300.
+#     irq: The IRQ number of the soundblaster.
+#            Possible values: 7, 5, 3, 9, 10, 11, 12.
+#     dma: The DMA number of the soundblaster.
+#            Possible values: 1, 5, 0, 3, 6, 7.
+#    hdma: The High DMA number of the soundblaster.
+#            Possible values: 1, 5, 0, 3, 6, 7.
+# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer.
+# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'.
+#            Possible values: auto, cms, opl2, dualopl2, opl3, opl3gold, none.
+#  oplemu: Provider for the OPL emulation. compat might provide better quality (see oplrate as well).
+#            Possible values: default, compat, fast, mame.
+# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly).
+#            Possible values: 44100, 49716, 48000, 32000, 22050, 16000, 11025, 8000.
+
+sbtype  = sb16
+sbbase  = 220
+irq     = 7
+dma     = 1
+hdma    = 5
+sbmixer = true
+oplmode = auto
+oplemu  = default
+oplrate = 44100
+
+[gus]
+#      gus: Enable the Gravis Ultrasound emulation.
+#  gusrate: Sample rate of Ultrasound emulation.
+#             Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+#  gusbase: The IO base address of the Gravis Ultrasound.
+#             Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300.
+#   gusirq: The IRQ number of the Gravis Ultrasound.
+#             Possible values: 5, 3, 7, 9, 10, 11, 12.
+#   gusdma: The DMA channel of the Gravis Ultrasound.
+#             Possible values: 3, 0, 1, 5, 6, 7.
+# ultradir: Path to Ultrasound directory. In this directory
+#             there should be a MIDI directory that contains
+#             the patch files for GUS playback. Patch sets used
+#             with Timidity should work fine.
+
+gus      = false
+gusrate  = 44100
+gusbase  = 240
+gusirq   = 5
+gusdma   = 3
+ultradir = C:\ULTRASND
+
+[speaker]
+# pcspeaker: Enable PC-Speaker emulation.
+#    pcrate: Sample rate of the PC-Speaker sound generation.
+#              Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+#     tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'.
+#              Possible values: auto, on, off.
+# tandyrate: Sample rate of the Tandy 3-Voice generation.
+#              Possible values: 44100, 48000, 32000, 22050, 16000, 11025, 8000, 49716.
+#    disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible).
+
+pcspeaker = true
+pcrate    = 44100
+tandy     = auto
+tandyrate = 44100
+disney    = true
+
+[joystick]
+#  joysticktype: Type of joystick to emulate: auto (default), none,
+#                  2axis (supports two joysticks),
+#                  4axis (supports one joystick, first joystick used),
+#                  4axis_2 (supports one joystick, second joystick used),
+#                  fcs (Thrustmaster), ch (CH Flightstick).
+#                  none disables joystick emulation.
+#                  auto chooses emulation depending on real joystick(s).
+#                  (Remember to reset dosbox's mapperfile if you saved it earlier)
+#                  Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none.
+#         timed: enable timed intervals for axis. Experiment with this option, if your joystick drifts (away).
+#      autofire: continuously fires as long as you keep the button pressed.
+#        swap34: swap the 3rd and the 4th axis. Can be useful for certain joysticks.
+#    buttonwrap: enable button wrapping at the number of emulated buttons.
+# circularinput: enable translation of circular input to square output.
+#                  Try enabling this if your left analog stick can only move in a circle.
+#      deadzone: the percentage of motion to ignore. 100 turns the stick into a digital one.
+
+joysticktype  = auto
+timed         = true
+autofire      = false
+swap34        = false
+buttonwrap    = false
+circularinput = false
+deadzone      = 10
+
+[serial]
+# serial1: set type of device connected to com port.
+#            Can be disabled, dummy, modem, nullmodem, directserial.
+#            Additional parameters must be in the same line in the form of
+#            parameter:value. Parameter for all types is irq (optional).
+#            for directserial: realport (required), rxdelay (optional).
+#                             (realport:COM1 realport:ttyS0).
+#            for modem: listenport (optional).
+#            for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
+#                           transparent, port, inhsocket (all optional).
+#            Example: serial1=modem listenport:5000
+#            Possible values: dummy, disabled, modem, nullmodem, directserial.
+# serial2: see serial1
+#            Possible values: dummy, disabled, modem, nullmodem, directserial.
+# serial3: see serial1
+#            Possible values: dummy, disabled, modem, nullmodem, directserial.
+# serial4: see serial1
+#            Possible values: dummy, disabled, modem, nullmodem, directserial.
+
+serial1 = dummy
+serial2 = dummy
+serial3 = disabled
+serial4 = disabled
+
+[dos]
+#            xms: Enable XMS support.
+#            ems: Enable EMS support. The default (=true) provides the best
+#                   compatibility but certain applications may run better with
+#                   other choices, or require EMS support to be disabled (=false)
+#                   to work at all.
+#                   Possible values: true, emsboard, emm386, false.
+#            umb: Enable UMB support.
+# keyboardlayout: Language code of the keyboard layout (or none).
+
+xms            = true
+ems            = true
+umb            = true
+keyboardlayout = auto
+
+[ipx]
+# ipx: Enable ipx over UDP/IP emulation.
+
+ipx = false
+
+[autoexec]
+# Lines in this section will be run at startup.
+# You can put your MOUNT lines here.
+
+

configs/pc/emulators.cfg

@@ -0,0 +1,3 @@
+dosbox = "bash /home/hoon/RetroPie/roms/pc/+Start\ DOSBox.sh %ROM%"
+default = "dosbox"
+dosbox-staging = "bash /home/hoon/RetroPie/roms/pc/+Start\ DOSBox-Staging.sh %ROM%"