Add RetroPie configs backup from /opt/retropie/configs

키 설정·패드 매핑·에뮬 설정을 sync-configs.sh로 동기화.

Co-authored-by: Cursor <cursoragent@cursor.com>

configs/msx/openmsx/share/joystick/8BitDo Ultimate Wireless Pro 2 Wired Controller.tcl

@@ -0,0 +1,23 @@
+proc auto_config_joypad { } {
+    # clear existing joypad configuration
+    global joystick1_config
+    dict for {btn binding} $joystick1_config { dict set joystick1_config $btn {} }
+
+    bind_default "joy1 button2 down" "keymatrixdown 6 0x20"
+    bind_default "joy1 button2 up" "keymatrixup 6 0x20"
+    bind_default "joy1 button3 down" "keymatrixdown 6 0x40"
+    bind_default "joy1 button3 up" "keymatrixup 6 0x40"
+    bind_default "joy1 button6 down" "main_menu_open"
+    bind_default "joy1 button7 down" "toggle_osd_keyboard"
+    bind "joy1 button6 down" -layer osd_menu "main_menu_close"
+    dict lappend joystick1_config A button1
+    dict lappend joystick1_config B button0
+    dict lappend joystick1_config DOWN +axis1
+    dict lappend joystick1_config DOWN D_hat0
+    dict lappend joystick1_config LEFT -axis0
+    dict lappend joystick1_config LEFT L_hat0
+    dict lappend joystick1_config RIGHT +axis0
+    dict lappend joystick1_config RIGHT R_hat0
+    dict lappend joystick1_config UP -axis1
+    dict lappend joystick1_config UP U_hat0
+}

configs/msx/openmsx/share/joystick/Pro Controller.tcl

@@ -0,0 +1,17 @@
+proc auto_config_joypad { } {
+    # clear existing joypad configuration
+    global joystick1_config
+    dict for {btn binding} $joystick1_config { dict set joystick1_config $btn {} }
+
+    bind_default "joy1 button2 down" "toggle_osd_keyboard"
+    bind_default "joy1 button3 down" "keymatrixdown 6 0x40"
+    bind_default "joy1 button3 up" "keymatrixup 6 0x40"
+    bind_default "joy1 button4 down" "main_menu_open"
+    bind "joy1 button4 down" -layer osd_menu "main_menu_close"
+    dict lappend joystick1_config A button1
+    dict lappend joystick1_config B button0
+    dict lappend joystick1_config DOWN -axis1
+    dict lappend joystick1_config LEFT -axis0
+    dict lappend joystick1_config RIGHT +axis0
+    dict lappend joystick1_config UP +axis1
+}

configs/msx/openmsx/share/joystick/README.txt

@@ -0,0 +1,16 @@
+This folder contains joypad configuration scripts, generated by EmulationStation's input configuration.
+They are read by openMSX at start-up and loaded automatically when the corresponding joypad is plugged in.
+
+If you wish to have a game specific joystick configuration, you can override the gamepad's configuration by:
+ * copy an already existing controller '.tcl' configuration file to the 'game' subfolder.
+ * edit the file and adjust the 'bind_default' commands or the 'joystick1_config' configuration.
+   See the openMSX documentation for how to use those commands:
+   - http://openmsx.org/manual/commands.html#bind
+   - https://openmsx.org/manual/commands.html#joystickN_config
+   - http://map.grauw.nl/articles/keymatrix.php
+ * rename the new '.tcl' file so the name is similar to the disk/tape/rom name (i.e. 'Metal Gear.zip' will load 'Metal Gear.tcl').
+   If you are not sure which name to use, start the game, then press 'F10' and type 'guess_title', followed by Enter.
+   openMSX will print the content name, which you can then use as a filename for the override configuration file.
+   NOTE: special characters '(:?/\*)', are automatically striped from the name so if your content file is 'ABC?.dsk',
+   then the configuration file should be 'ABC.tcl'.
+

configs/msx/openmsx/share/scripts/retropie-init.tcl

@@ -0,0 +1,44 @@
+namespace eval retropie {
+
+proc init {} {
+    set rom_name [guess_title]
+    set config_dir [file normalize "$::env(OPENMSX_USER_DATA)/joystick"]
+
+    # sanitize the rom name
+    regsub -all {[:><?\"\/\\|*]} $rom_name "" rom_name
+
+    # auto-configure the 1st plugged in joystick, but only if present
+    # openMSX automatically loads the plugged in joysticks in 'autoplug.tcl'
+    if {![info exists ::joystick1_config]} {
+        return
+    }
+
+    if { !($rom_name eq "") } {
+        if { [ file exists "$config_dir/game/$rom_name.tcl" ] } {
+            load_config_joystick $rom_name "$config_dir/game/$rom_name.tcl"
+            return
+        }
+    }
+
+    # get the 1st joystick name
+    set joy_name [machine_info pluggable joystick1]
+    # ... and sanitize it
+    regsub -all {[:><?\"\/\\|*]} $joy_name "" joy_name
+    if { [file exists "$config_dir/$joy_name.tcl"] } {
+             load_config_joystick $joy_name "$config_dir/$joy_name.tcl"
+    }
+}
+
+proc load_config_joystick { conf_name conf_script } {
+    source "$conf_script"
+    # check for the joypad auto-configuration function
+    if { [info procs "auto_config_joypad"] == "" } {
+        return
+    }
+    auto_config_joypad
+    message "Loaded joystick configuration for '$conf_name'"
+}
+
+}; # namespace: retropie
+
+after boot retropie::init

configs/msx/openmsx/share/settings.xml

@@ -0,0 +1,12 @@
+<!DOCTYPE settings SYSTEM 'settings.dtd'>
+<settings>
+  <settings>
+    <setting id="default_machine">C-BIOS_MSX</setting>
+    <setting id="osd_disk_path">/home/hoon/RetroPie/roms/msx</setting>
+    <setting id="osd_rom_path">/home/hoon/RetroPie/roms/msx</setting>
+    <setting id="osd_tape_path">/home/hoon/RetroPie/roms/msx</setting>
+    <setting id="osd_hdd_path">/home/hoon/RetroPie/roms/msx</setting>
+    <setting id="fullscreen">true</setting>
+    <setting id="save_settings_on_exit">false</setting>    <setting id="auto_enable_reverse">off</setting
+  </settings>
+</settings>