Add RetroPie configs backup from /opt/retropie/configs

키 설정·패드 매핑·에뮬 설정을 sync-configs.sh로 동기화.

Co-authored-by: Cursor <cursoragent@cursor.com>

configs/daphne/hypinput.ini

@@ -0,0 +1,59 @@
+# Sample hypinput.ini
+# All key options listed
+# Hypseus uses SDL2 Keycodes
+#
+# The first two entries are SDL2 keyboard codes or names (0 for "none")
+#
+# Find SDL2 keyboard code information here:
+# https://github.com/DirtBagXon/hypseus-singe/blob/master/doc/keylist.txt
+#
+# Hypseus Singe supports configuration on multiple joysticks
+# First joystick is defined as 0, second joystick as 1 etc.
+#
+# IMPORTANT: Find the joystick button and axis by running:
+# jstest /dev/input/js0 || jstest /dev/input/js1
+#
+# The third number in config is a joystick button code (or 0 for "none")
+# Since 0 is reserved for special meaning, joystick button 0 is
+# identified as 1. Button 1 is identified as 2, and so on.
+#
+# Defining 001 (or 1) identifies first joystick(0) button 0
+# Defining 111 identifies second joystick(1) button 10
+#
+# The fourth number in config (if specified) is the joystick axis
+# configuration (or 0 for "none"). Since 0 is reserved for
+# special meaning, joystick axis 0 is identified as 1.
+# Axis 1 is identified as 2, and so on.
+#
+# Only the first four switches are defined (SWITCH_UP->SWITCH_RIGHT) for axis
+#
+# Defining -001 (or -1) identifies first joystick(0) axis 0 in negative direction
+# Defining +102 identifies second joystick(1) axis 1 in positive direction
+
+# KEY_BUTTON3 Turns scoreboard on/off in lair/ace
+
+#              Key1             Key2       Button    (Axis)
+[KEYBOARD]
+KEY_UP         = SDLK_UP        SDLK_r     5         -002
+KEY_DOWN       = SDLK_DOWN      SDLK_f     7         +002
+KEY_LEFT       = SDLK_LEFT      SDLK_d     8         -001
+KEY_RIGHT      = SDLK_RIGHT     SDLK_g     6         +001
+KEY_COIN1      = SDLK_5         0          1
+KEY_COIN2      = SDLK_6         0          0
+KEY_START1     = SDLK_1         0          4
+KEY_START2     = SDLK_2         0          0
+KEY_BUTTON1    = SDLK_LCTRL     SDLK_a     14
+KEY_BUTTON2    = SDLK_LALT      SDLK_s     15
+KEY_BUTTON3    = SDLK_SPACE     SDLK_d     16
+KEY_SKILL1     = SDLK_LSHIFT    SDLK_w     0
+KEY_SKILL2     = SDLK_z         SDLK_i     0
+KEY_SKILL3     = SDLK_x         SDLK_k     0
+KEY_SERVICE    = SDLK_9         0          0
+KEY_TEST       = SDLK_F2        0          0
+KEY_RESET      = SDLK_0         0          0
+KEY_SCREENSHOT = SDLK_F12       0          0
+KEY_QUIT       = SDLK_ESCAPE    SDLK_q     17
+KEY_PAUSE      = SDLK_p         0          0
+KEY_CONSOLE    = SDLK_BACKSLASH 0          0
+KEY_TILT       = SDLK_t         0          0
+END